How To Install Inverter For Solar Panels

Installing a Go Power! Inverter

Go Ability! offers three easy means to install your new power inverter. Make certain you read through your user manual before tackling your inverter installation.

Pick ane: Plug & Ability

Plug & Power is the easiest way to install Go Power! Inverters. Your inverter should be located close to the batteries simply in a protected expanse costless from moisture, dust, dirt and bombardment fumes. The DC Install Kits listed on page x contain everything yous need to install your inverter properly. In one case installed, simply plug your power cord into your Go Power! Inverter and you will have AC power.

Install the inverter almost the batteries (<10' away)
If bachelor, plug shore power string into inverter (charger) when camping ground
To prevent extra battery drain, turn off the converter when using the inverter

Option two: Go Power! Hardwire with standard Automatic Transfer Switch

Choice Two: Go Ability! Hardware with the standard automatic transfer switch

Wire your converter to the shore power side of the transfer switch to ensure the inverter is not beingness used to charge the RV batteries.

Install the inverter near the batteries (<10' away)
Wire the TS-30 to shore power, inverter and RV load center
Converter or bombardment chargers are wired to the TS-30 shore input to prevent actress bombardment bleed when the inverter is being used

Choice iii: Get Power! Hardwire with Get Ability! Prewired Automatic Transfer Switch

GP-TS is wired to shore ability, RV load centre and plugs directly into the inverter
GPC Converter plugs into the outlet on the GP-TS. The converter automatically turns off when using inverter power

Consult all inverter manuals for complete instructions prior to installation!